Pages

Tuesday 29 December 2020

Culverts and Bengal Tigers

I finally got round to finishing off the culvert from Sabotag3d which has been lurking around for ages, and now can be safely stored away in a terrain box till we are all allowed out to play again. 

The early war campaign uses culverts in one game, and I should have purchased two sets, but thought I would check out one before fully committing. They are very nice, and quick and easy to paint. 


Say it with flowers.. It's always springtime when armies clash..   except when it's winter. Of course.


A platoon of Volksgrenadiers plus a FOO (which I don't think is even an option in the support list). In Chain of Command, there is a headquarters of the officer plus 3 rifle grenadiers, a 2 LMG + riflemen squad, and 2 squads of 8 men (inc Junior leaders) equipped with the StG 44 Assault Rifle. 


And how can you do Battle of the Bulge without a Royal Tiger? - The new Rubicon kit was irresistible. This is the base build not yet glued together so I can paint the interior and the track assemblies. 

And after a little bit of work, texturing the armour plate, replacing grab handles with wire, making up a new towing cable and other minor changes. Here it is undercoated and ready for the airbrush. 

Yes, I know I should be painting Flags of War Jacobites, or even Sub-Roman British and Early Saxons, but this won't take long..  :) 


Monday 21 December 2020

Resist anything but Temptation

So here it is.. in my hot little hands, well done Rubicon. Shame that I am still waiting for the infantry to go with it..(not from Rubicon) it's a ginormous box!

I'm afraid I feel a dose of Late War Empress British coming on...  I should have resisted.


UPDATE - the Warlord Games order arrived today, a box each of their Winter Grenadiers, Veteran Grenadiers, Grenadiers in Winter clothing and Winter SS, which together with a spare bloke with an MP40 I had lurking around (actually from the Warlord Fallschirmjager Support group box), and another bloke who will be a FOO (Forward Observation Officer), made up a Volksgrenadier Sturm Platoon. 



Green troops but well equipped. In my favoured ruleset (Chain of Command), they are small squads, will be easier to hit and suffer a morale penalty, but they still have pretty decent firepower. Similarly German tank crews of the period were of pretty poor quality, so it makes an interesting equation, superior equipment but inferior training and skills.

Now all I have to do is resist the Rubicon schwimwagen and another Sdkfz 251 in whitewash..  :) 

Friday 18 December 2020

Sub-Roman Peasants

In the Lardies Dux Britanniarum rules, the 'British' forces are initially, 1 group of elites, 2 groups of warriors, 3 groups of levy - (peasants with pointy sticks), and 4 archers. So here they are.




When I slapped the LBMS transfers on, the shield designs are too small. I persevered, but now I am wondering whether to leave them as is, or try to paint in some kind of rim or something.. 

I suspect I will leave them as is. 

Just the Archers and 2 groups of Warriors to do, and then it is on to the Saxons. I just have to make sure I don't get distracted by shiny things.. ooooh Rubicon have released their 1/56 Tiger II...  watch this space.


Sunday 13 December 2020

More Sub Roman British

These chaps will be the elite troops of my Sub Roman British army. Still waiting for the LBMS shield transfers to arrive but otherwise these chaps are done. Next up with be two groups of warriors. Then the three groups of levy.




Friday 11 December 2020

First Dux Britanniarum

So, I was supposed to be painting 1745 Scots..  but someone on the Society of Ancients forum had a bunch of Sub-Roman British metal casts from Gripping Beast for cheap..  and I ended up with a force for the Sub Roman British for Dux Britanniarum (TooFatLardies).

So then Warlord Games had their price reductions, and I had a £5 off 'medal' so it made sense (to a wargamer anyway), to pick up all their early Saxon miniatures (formerly 'Saxon Miniatures'). 

Well - when you have a bunch of new figures, for a new period, and a new(ish to me) set of rules, it would be rude not to paint up some test figures.

Sub-Roman British Leader stand



 

Monday 30 November 2020

Scots Wha Hae

It seemed appropriate on St Andrew's Day to finish off two test pieces for my Jacobite forces. These are perhaps more of a colour palette test. Though I am going to have to replace my Armypainter 'hard leather' colour, as the entire bottle split open when I tried to open it. I also managed to have the Vallejo Military Green come out an entirely different colour when I used it for highlights on the Lowlander's breeches. 

Otherwise, I am happy. They can join the solitary Hanoverian infantryman that so far constitutes my entire painted 1745 force. 

And Flags of War who produce these figures have a current Kickstarter for further figures including Bagot's Hussars and artillery pieces and crews. If you sign up to the Kickstarter you can get the already produced packs at the reduced Kickstarter prices, so it's a really good deal, and an opportunity to add soem lovely figures to your forces.

So here they are, Hamish and Rab. I'll finish off the basing in one go once the rest are painted.


And as I am starting to get into painting these, keep an eye on Stiu's blog for updates on how his Government forces are progressing.


Wednesday 25 November 2020

Some Barricades - clearing the workbench

 Over time, besides major projects I have succumbed to occasional temptation, such as carts and small resin scenery items, these tend to get assembled (if required), undercoated, and then they are just a little too dull or low priority, and so they hang around for ever. 

Time to clear a little space, so I slapped paint on some barricades and a broken down cart from Alternative Armies.

These will do nicely for barricades for pretty much 1630 - 1950. And the cart from 1630- 1900 I guess. I wanted the barricades primarily for civilian defences in WW2, but I suspect they will see use in AWI, and possibly even the Jacobite period. The castings are nice, as I usually expect to have to fill at least a few holes in resin casts, but these ones I decided it wasn't necessary.

Not hugely exciting, but another space cleared in the lead(resin) pile. I really must start putting new pieces into a scenic context, not just snapping away on the very tatty old cutting mat.



 

Thursday 5 November 2020

Why I hate scales - Compare the Pair

Used to drive me mad learning them on the Recorder, back in prehistory. No, sorry. Anyway. I recently bought the Rubicon Comet kit. The Comet is a very late war (1945) British cruiser tank, the ultimate development of the concept before the 'Main Battle Tank' Centurion. I have always liked how they looked since building the 1/76 Matchbox Comet kit back in ohhh..  sometime in the mid 70's I guess. 

Up until now, the only Comet models available have been in resin, and I have resisted purchasing them for two main reasons. 

Firstly; I find resin hard to work with, the dust from drilling and filing is hazardous, and there are often mould imperfection. Secondly, having a Comet, I would then be inevitably drawn to purchasing Empress Miniatures very nice Later War British Infantry in smocks and tabards... which would inevitably lead to Empress Miniatures Later War German Volksgrenadiers, and then I would need late war terrain with snow and ice, and well, a slippery slope. 

But - my birthday coming up, Rubicon releasing their Comet kit, and I thought I might really go to town on it. Comet duly purchased. Gorgeous kit, goes together very nicely. Rubicon even provide a crew figure. But there's the problem.

Now all my vehicles are in 1/56. it is what plastic kits are made in, by Italeri/Warlord, and Rubicon. It's supposed to be '28mm' scale. Which is the new 25mm, and it's actually now more like 31 or 32mm for many figures.  And the maths works out nicely. For a 'tallish' (for 1945) man, of 172 cm (roughly 5'9" for UK oldies), 1/56 is about 30mm. So our tank commander should work nicely alongside current 28mm figures. Except not.

28mm British Infantry Officer and 1/56 British Tank Commander

Ok, so admittedly, one of them has no knees.. but just look at the difference in the head sizes, and the hands. Impossible. Either I have to source another figure or make sure the Comet and its commander are kept well away from other figures. 

And I have to stay away from the Empress Miniatures site. Because I already have 1st Corps figures painted up for 1944 British. And if \I was to buy any more WW2 infantry, it should really be the new 1st Corps BEF figures, except...  all their accompanying vehicles are in 1/48...

It must be so easy for all those wargamers who didn't move between continents and bought up all those 1/50 diecast Corgi tanks when they were still available and not at the stupid money prices you see on eBay. £90 for a Comet? Ridiculous. Anyway.. here's mine so far:

Work in Progress Comet Tank 1/56 Rubicon, right side.

Work in Progress Comet Tank 1/56 Rubicon, left side.

Still not sure what to do about more stowage, grab handles on the turret have been replaced, and everything is dry-fitted to make painting easier, so the front and rear track side pieces have to be added, tow cable, more stowage, netting/branches etc. The white stuff is modelling putty to add texture to cast armour and do the weld seams.  The rear telephone cables, latches on the storage bins and so on are also to be added. Not sure about aerials. The images I have seen don't seem to show obvious aerials in wartime pictures. 

The one thing I wish I had was a brass aftermarket 'birdcage' to make up for the commanders sights. I thought about making one, but it might be well beyond my model making skills. The alternative is to put a 'cover' over the solid plastic one, but I have never seen one in photographs.

Tuesday 27 October 2020

Finishing Things.. seem familiar

Regular readers of this blog (are there any?) will doubtless recognise some of the following. I embarked on a spree some time back of putting together deployment points and civilians, as they are not only an important part of 'Sharp Practice 2' my current ruleset of choice for the American War of Independence, but also provide nice table dressing.

British Jump off point with drummer, two officers and a dead continental infantrymen

British Deployment Point 1.

Unfortunately; as is my butterfly way, I got distracted by 'Oh Shiny' things... again regular readers will doubtless remember many of the 'Oh Shiny' things that intervened, (many of which;, sadly, have subsequently themselves been put into a box, to be finished off 'at some point in the future'.) Part of this was also that I wasn't very happy with how they were turning out. Off to the shed and in a box they went.

Cor, look at the lace on that bloke..

So as is also the way of wargamers, eventually, the dread procrastination led me to reorganise, for the umpteenth time, the storage and packing of my figures. And I rediscovered this lot. Needing only a few licks of the brush to complete, needless to say they have been sitting, awaiting that for the last two months or so. I convinced myself they didn't need a significant repaint, and finally they got the last little bit I needed to do, drums, lace, buttons, etc.  So here they are.


The 'Baron' - British Deployment Point 2. 


The Little Drummer Boy - American Deployment Point 1


Getting Directions - American Deployment Point 2



Townfolk and Farm hands.


Gentlefolk


British Senior Officer


Highland Sergeant

Another box that can be packed up together with the AWI wagons. Little steps.



Monday 26 October 2020

Fancy a snifter.. ? CoC Drinks anyone?

One of the support options for the British forces in the Too Fat Lardies 'Blitzkrieg' supplement to their Chain of Command rules is the 'Drinks Cabinet'. Apparently it wasn't unknown for British officers to unofficially issue a few medicinal 'stiffeners' to improve moral.

Sabotag3d make a very nice printed drinks cabinet, and I just happened to have a slightly Blimpish looking officer figure lurking in the shed. You don't actually need a marker to play this support option but it was too cool not to. In play I think I might use it to replace a Jump Off Point when the support option is taken. I really need to look into techniques for painting glass, but here's the rough cut version.


I really shouldn't photograph things, I keep spotting mistakes... the keen eyed might also notice the legs of the cabinet have been cut down a bit. I found the original to be a little too tall for my taste. With hindsight, printing out a phototgraph of a rug might have been a better option, but IMHO, it still looks good when viewed even 30cm away. And I really need to fix up his boots. But it is one more thing off the painting table! Huzzah!

Monday 19 October 2020

Finished Castle

So not quite six days later. I keep spotting things in the pictures that I didn't see before, but I have decided it's done. No more faffing about. The roof tiles are by Warbases, but I really struggled this time - They just didn't want to lie flat.

I also didn't manage to get all the colours to come out well in the pictures.. but I swear they are there !



A small postern gate.. just in case you need to leave by the back when neighbours come knocking at the front...

Saturday 17 October 2020

Scratchbuilding a castle

So Stiu and I are going to do some 1745 gaming. Sounds like fun, and a lot of plaid..  So on Tuesday I casually asked some folk what 28mm Scottish buildings for the period were out there. Not a lot apparently. Anyscale Models do some nice Scottish 'black houses' but in 1/76. So I thought I might as well build something. And this beauty is about 5 minutes from home. 


Claypotts Castle. A classic Scottish 16th Century Z Plan castle. 

So I have some foam core, I have an Australia Post picture tube, the centre from a roll of tinfoil, and some windows from Warbases. How hard can it be?


The crenellated section on the left-hand tower is a spare piece from my Hoka Hey church, pressed into service as this is going to be 'inspired by' rather than a straight copy, and I thought the fighting platform would add interest. All cut by eye and assembled with a glue gun.


And a first coat of thinned Wickes Ready Mix filler, MDF base and a cardboard roof section. 


File down the worst of the first coat, another thin layer of ready mix filler, then rolled with the Greenstuff World small cobblestones roller, and added detail scraped in with a small screwdriver.


Doors etc to be added...


Now waiting for roof tiles, a door, some detailing, and ground work. I am very happy with how this is going so far. 

Monday 12 October 2020

Where to Next?

There seems to be a huge amount going on at the moment.  Work is hectic, loads of change and changing demands, reminding me of the Billy Connolly clip about 'demands'. (Don't listen if you are offended by bad language... )

This week has been poignant too. My dad died nearly two years ago, and ever since, I have visited his shed when I needed a tool, or a set of sanding disks, or, well, pretty much anything, from a lathe or a bandsaw, to tool makers dies and spoke-shaves...  

There's been something comfortable about going there, his old, paint-stained dustcoat still hanging from the door. I'm much closer to him there, than at a lump of stone in a field overlooking the estuary. That stone may have his name etched in, but it's etched much deeper into the vice that has been on his workbench for 50 years, or the lovingly oiled Stanley planes and carefully arranged drill bits. In what would have been chaos for anyone else, he would turn up what you needed in an instant, with a conjurers grin and more than likely, a pithy piece of Scots.

But now the house has finally been sold. So the workshop must be cleared. And this week I stood in the midst of the sawdust and clamps, the chisels and bits of wood that 'might come in handy', and looked at what I might take away. I could have taken it all, but how often will I use a lathe, or the bandsaw? They would simply grow dust in my shed and I couldn't bear the censure of his shade as the lovingly tended blades turned to rust and handles to rot.  

So I took one or two small things, a hammer a punch, a tape measure, And the rest will go to the 'Men's Shed' and I hope will be used, and oiled and tended, and bring as much joy as my dad got from a clean wood surface or a well made tenon joint. It's what he would have wanted. 

Pardon me for the introspective. I suppose I have reached a point where I am at a bit of a hobby crossroads. 

My usual playing group have gone silent. We haven't met as a club since February. I have been playing at the Virtual Lard days, which have been fun but also served to remind me of what I am missing. I've made a new table top, so I could host games, but no-one to host them for in lockdown. I also seem to be getting too tired to do hobby stuff during the week, and too busy to do hobby stuff on the weekend.

I've been gradually painting figures, but it's hard to sustain the motivation to paint when you wonder if you will ever play with the figures. One of the most recent sets of figures were the Orcs for 'goblin week' for for the 'Loose Association of Wargamers' forum. 

They're doing Dwarfcember, so I thought i would pick up the Oathmark dwarves from my local game store. Sold out. eBay to the rescue, and a set of Alternative Armies Flintloque Dwarf Landwehr arrived on Saturday, another set of figures I will paint, then be put into a box, and passed on to the wargamer's equivalent of the Men's Shed in 20 or so years time. 

Incidentally, if there ever were an wargamers equivalent of the Men's Shed, then I suspect the organisers would be nobbled by figure manufacturers in minutes... there has to be more unused lead out there in sheds, boxes, basements and attics than in every manufacturers stockroom and blister pack combined.  

It all leaves me wondering what to paint next. Logically, having finished the Romans, then I should do an opponent so I can run solo games of Infamy, but I have never been enthused by solo gaming.  There are a whole bunch of 'almost finished' AWI deployment points, carts, Roman mule drawn carts, etc. 

Or I could return to the WW2 Malaya figures, Medievals, the AWI, the 1745, etc...   Who knows, I may have to roll a dice. 


Carts, wagons, dwarves, lictors, there's even a Kenneth in there. All in dire need of paint and stuff.

Friday 2 October 2020

Romans...

And I finally finished a force for Infamy. Republican Roman. Mainly Victrix plastics with the Warlord Scorpion and arms for the crew. Shields by LBMS.

Given the nominal scale of Infamy, they should all really be from the same legion, but one of the options includes 'raw" legions, so I wanted one to be all pristine, newly equipped and shiny, the veterans more utilitarian. The veterans are on the right.

Tuesday 29 September 2020

Gobbortunity Knocks - Orcses

So as a little distraction from the more serious stuff, some of the folk on one of the forums I'm a member of, thought it would be fun to run a goblin Week. So the challenge was to paint up a unit of Goblins/Orcs - the starting gun was 28 September. 

I had some of the Kings of War Orcs plastics, assembled and undercoated by Sunday night, and managed to whizz through them over the last two days. 

So here they are in all their gory.








Sunday 20 September 2020

AWI Scatter, Civilians and Deployment Points

One of the things I did a couple of years back was pick up job lots of AWI figures from shows, eBay, LAF and elsewhere. So I ended up with an eclectic mix. 10 officers and no rank and file for the Legion for example. I decided I should turn some of the assorted lots into scatter and deployment points (for Sharp Practice). 

This lot last saw a paintbrush in January 2019, so it's time to actually finish them. It's now at the stage where they mainly need metallic colours and some skin highlights and a general tidy up. The focus will be to get these done quickly, so they can get out of the way of the queue. I will finish them this week!

Overall shot: